EN
Shower mixers can be a fine thing, until they stop working. If you notice that your shower has become less powerful, the mixer could have a few problems. Fortunately, with a little direction, you can identify the cause and perhaps even correct it yourself. We’ll investigate common issues, such as why the water temperature is fluctuating or why the mixer is noisy. Our SHUIDAO tips will ensure your shower mixer functions as new
Causes and Solutions
There are several reasons a shower mixing valve may not be working properly. Another frequent problem is mineral buildup from the water. This can clog the components inside the mixer, and you’ll be hard pressed to get water to go through. Another issue might be worn seals or gaskets, resulting in leaks or drips. You can get rid of this by cleaning the mixer with the help of vinegar to get rid of the mineral deposits for good. If the seals are the source of the issue, they may need replacing, an easy fix made easier by a basic repair kit you can pick up from SHUIDAO
Troubleshooting and repairs
If your shower mixer is still playing up, it’s time to delve deeper. First make sure that the water pressure is not too low not too high, because this can dramatically influence the performance of the mixer. The water pressure can be checked with a gauge. If you think pressure is off, you can try adjusting the pressure valve. Make sure all connections are tight for leaks or drips and tighten them now. If you are not comfortable performing these repairs yourself, it’s a good idea to call in a professional
Tips for maintaining consistent heat
No one appreciates a shower that turns icy cold mid rinse! And to keep the water temperature just right, ensure your mixer’s thermostatic valve is doing its job, too. This valve mixes hot and cold water to maintain a consistent temperature. If you are having trouble with the temperature, you may need to recalibrate or replace it. Even normal inspection and cleaning of the valve can avoid problems as well
Clearing obstructions for better performance
And lastly, ensure that your shower mixer isn’t blocked by anything blocking the water flow. Dirt and debris can occasionally make their way inside and clog things up. Pulling apart the mixer and clearing any gunk can help. Take care to properly disassemble and reassemble the machine so that all is put back as it should be, and new problems don’t develop